Tips and Tricks HQ Support

Support site for Tips and Tricks HQ premium products

  • Home
  • Contact Us
  • Documentation
  • Forum Home
    • Forum
    • Forum Search
    • Forum Login
    • Forum Registration
You are here: Home

Paulfonzo

  • Profile
  • Topics Started
  • Replies Created
  • Engagements
  • Favorites

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 26 total)
1 2 →
  • Author
    Posts
  • January 4, 2012 at 3:38 pm in reply to: eMember 7.5.2 Can't Create New Membership Level #40302
    Paulfonzo
    Member

    Worked like a charm. BTW, I didn’t have to uninstall the eStore and Affiliate plugins, just the eMember (which is now 7.5.3).

    Thanks!

    Paul H.

    January 3, 2012 at 11:16 pm in reply to: eMember 7.5.2 Can't Create New Membership Level #40300
    Paulfonzo
    Member

    Hi Peter,

    I did that, and still got the same error message. BTW, I use a custom CSS style sheet from back around version 6.0, possibly a little earlier, that I back up and copy over anything new. This caused a recent problem in the 7.5.2 upgrade with the password reset showing at the bottom of every page until I added a single line of CSS code to make it disappear. Don’t know if that helps?

    Paul H.

    January 3, 2012 at 9:10 pm in reply to: eMember 7.5.2 Can't Create New Membership Level #40298
    Paulfonzo
    Member

    P.P.S. After reading similar topics, I originally deactivated the eMember plug-in before deleting the old files on the server and uploading the newest build.

    January 3, 2012 at 9:04 pm in reply to: eMember 7.5.2 Can't Create New Membership Level #40297
    Paulfonzo
    Member

    P.S. I also tried switching my theme to WP default and got the same error message.

    January 3, 2012 at 1:58 am in reply to: Extraneous Password Reset HTML in source #34000
    Paulfonzo
    Member

    Many thanks to both of you! It worked just fine, adding the line to my custom CSS file, which is backed up, and enabling a password reset page.

    Wishing you guys a great 2012!

    Paul H.

    January 1, 2012 at 9:46 pm in reply to: Extraneous Password Reset HTML in source #33997
    Paulfonzo
    Member

    I just upgraded two days ago to the latest versions of eMember eStore (cart) and Affiliates, and now have the same symptom. None of the above suggestions worked: turning off fancy login widget and/or adding password reset page.

    http://www.newworldview.com

    Note: I have a custom style sheet that traces back to somewhere around version 6 of eMember, so when I update that plug-in I use the old CSS code (I noticed that there are some new CSS additions in eMember 7.5.2).

    Thanks in advance,

    Paul H.

    April 20, 2011 at 8:09 pm in reply to: IonCube Loader #22576
    Paulfonzo
    Member

    P.S. The license key is registered in the Product License page, but whenever I press Activate, I get the above message.

    Moreover, I tried an experiment to see if it would manually stamp a PDF file in an /estore subdirectory and got the following error message:

    Help

    WP PDF Stamper – Manual Stamping

    Warning: get_headers() [function.get-headers]: URL file-access is disabled in the server configuration in /homepages/31/d110419763/htdocs/xyzxyzxyz/wordpress/wp-content/plugins/wp-pdf-stamper/wp_pdf_stamp_utility_functions.php on line 0

    Warning: get_headers() [function.get-headers]: This function may only be used against URLs. in /homepages/31/d110419763/htdocs/xyzxyzxyz/wordpress/wp-content/plugins/wp-pdf-stamper/wp_pdf_stamp_utility_functions.php on line 0

    Site error: the file /homepages/31/d110419763/htdocs/xyzxyzxyz/wordpress/wp-content/plugins/wp-pdf-stamper/api/stamp_api.php requires the ionCube PHP Loader ioncube_loader_lin_5.2.so to be installed by the site administrator.

    The URL that you specified in the “URL of the source file” field does not seem to be a valid URL! It seem to be giving a 404 error! Please check this value again:

    http://xyzxyzxyz/wordpress/estore/test-file.pdf

    An error occurred while trying to stamp the file!

    ~~~~~~~~~~~~~~~~~~~~

    Is that similar ioncube error the result of PDF Stamper still NOT be properly activated?

    Paul H.

    April 20, 2011 at 7:53 pm in reply to: IonCube Loader #22575
    Paulfonzo
    Member

    They got ioncube working, but now for the final activation, I put in the license key and got: “License key is invalid!

    Reached Maximum Allowable Domains!”

    Please advise!

    Thanks,

    Paul H.

    April 20, 2011 at 7:05 pm in reply to: IonCube Loader #22574
    Paulfonzo
    Member

    I am running on a shared server, so this was another variable. I just finished an hour with tech support at 1&1 and they concluded that there is a problem in THEIR configuration, and will continue to work on it. So I’m just mentioning this for those who may run into similar install problems on a shared host.

    Thanks again, and I hope to report back one final time with the plugin finally working.

    Cheers,

    Paul H.

    April 20, 2011 at 1:11 am in reply to: IonCube Loader #22573
    Paulfonzo
    Member

    That’s okay, I feel like I’m very close. I will review those installation instructions and then contact my webhost, 1&1.com. I will report back.

    Thanks,

    Paul H.

    April 19, 2011 at 1:32 am in reply to: IonCube Loader #22571
    Paulfonzo
    Member

    Hi,

    I did as you suggested, put ioncubed-version.php in root, and it ran just fine, got the “Hello World!…” message.

    In your message above you said “if you have the ioncube LOADER installed correctly…” , not the DECODER. So I’m still confused. I tried to activate PDF Stamper and continue to get:

    “Site error: the file /homepages/31/d110419763/htdocs/newworldview/wordpress/wp-content/plugins/wp-pdf-stamper/wp_pdf_stamp1.php requires the ionCube PHP Loader ioncube_loader_lin_5.2.so to be installed by the site administrator.”

    Again, this error message mentions Ioncube LOADER, not DECODER.

    Again, I successfully installed the Ioncube LOADER, but you also said above “you don’t need the ENCODER…”

    What do I still need?

    Thanks,

    Paul H.

    April 18, 2011 at 9:06 pm in reply to: IonCube Loader #22569
    Paulfonzo
    Member

    P.S. When I run info.php in root I also get:

    Additional Modules

    Module Name

    dbase

    ionCube Loader

    April 18, 2011 at 9:04 pm in reply to: IonCube Loader #22568
    Paulfonzo
    Member

    Hi,

    I am trying to get PDF Stamper 3.3.3 and WordPress 3.1.1 working on my shared server on 1&1. I have successfully installed IonCube Encoder 4.07. When I run info.php it says:

    Linux infong 2.4 #1 SMP Thu Nov 25 01:59:22 UTC 2010 i686 GNU/Linux

    using PHP Version 5.2.17

    This program makes use of the Zend Scripting Language Engine:

    Zend Engine v2.2.0, Copyright (c) 1998-2010 Zend Technologies

    with the ionCube PHP Loader v4.0.7, Copyright (c) 2002-2011, by ionCube Ltd.

    When I run minimum requirement checker, I get:

    IonCube Decoder red X (not installed)

    CURL Library green checkmark (OK)

    PHP Version 5.2.17

    What do I need to do to get the DECODER installed and/or working. Is it DIFFERENT than the Encoder? Does it require IonCube Encoder to work?

    Thanks,

    Paul H.

    April 7, 2011 at 5:50 pm in reply to: Free Registration Misc Tweaks Issue #31144
    Paulfonzo
    Member

    P.S. Get this, ten minutes later I receive a second email, this time the link sends me to the proper page. In the interim, I had commented out the previous register page short code:

    [free_rego_with_email_confirmation]

    and reanimated the normal one:

    [wp_eMember_registration_form:end]

    Do I need a second version of the register page that has the

    [wp_eMember_registration_form:end]

    in it?

    The thing is, it worked before in its current form in WP 2.9.x and eMember 5.8.8.

    Thanks.

    January 5, 2011 at 3:17 pm in reply to: Blacklist not working #27730
    Paulfonzo
    Member

    Will do, many thanks!

    Paul

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 26 total)
1 2 →

Forum Related

  • Forum Home
  • Forum Search
  • Forum Registration
  • Forum Login

Support Related Forms

  • Contact Us
  • Customer Support
  • Request a Plugin Update
  • Request Fresh Download Links

Useful Links

  • Plugin Upgrade Instructions
  • WP eStore Documentation
  • WP eMember Documentation
  • WP Affiliate Platform Documentation
  • Tips and Tricks HQ Home Page
  • Our Projects

Quick Setup Video Tutorials

  • WP eStore Video Tutorial
  • WP eMember Video Tutorial
  • WP Affiliate Platform Video Tutorial
  • Lightbox Ultimate Video Tutorial

Our Other Plugins

  • WP Express Checkout
  • Stripe Payments Plugin
  • Simple Shopping Cart Plugin
  • Simple Download Monitor

Copyright © 2025 | Tips and Tricks HQ